Big Changes to the Podcast Format (Podcast 638)

Big Changes to the Podcast Format (Podcast 638)

With Apple slowly phasing out the Enhanced Podcast format, it’s time to move on. Luckily there is something that I feel is much better, as I’ll explain today.

After a few episodes short of 600 that I’ve released in the Enhanced podcast format, it’s time to move on. I’m dedicating this week’s podcast to explaining the how, why and what of these big changes that I’ve just implemented, and I really hope you like what I’ve done.

The Demise of the Enhanced Podcast

First, let me explain a little background. I started this podcast at the beginning of September in 2005, initially starting with mp3 audio, but then from episode 40, after a lot of encouragement from the audience, I switched to Apple’s proprietary Enhanced podcast format, with the file extension m4a. I was a Windows user at the time and bought a Mac Mini so that I could use GarageBand as that was really the only way to create Enhanced podcasts without jumping through too many hoops.

Apple’s iPod’s and the Podcast app in iOS supported the Enhanced podcast format, until Apple themselves broke it in the iOS 8 update. It took three years until iOS 11 for Apple to fix the Podcasts app, making it possible for people to see images as I referenced them in the audio again. Over roughly the same time period Apple removed the ability to create Enhanced podcasts from GarageBand, so I’ve had to keep a copy of GarageBand 6 on my computers, just for the purpose of creating my Enhanced podcast each week.

The old GarageBand has gradually slowed down and now takes almost five minutes to start and since updating to the latest version of the Mac OS I now see a message saying that GarageBand will not work on future versions. Basically, the writing is on the wall for the Enhanced podcast format, so I think it’s time to put it to rest.

MP3 Chapters

I have to say though, that I’m very excited by something that Apple have done with iOS 12, and that is adding support for MP3 Chapters to the Podcasts app. MP3 chapters aren’t new, with the standard being around for about as long as the Enhanced Podcast, but therein lies the reason that I’m excited to see Apple add this support to iOS 12. There is already a much better ecosystem for MP3 Chapters than there has ever been for Enhanced podcasts. 

From now on I am going to be releasing one mp3 file each week, instead of both an m4a and an mp3 file, but the mp3 audio file now has chapter information and the images that I talk about are also embedded, just like an Enhanced podcast, but all players that support mp3 will continue to be able to play the files, even if they don’t support chapters.

More good news is that there are more applications both for iOS and Android that support chapters and some also supporting the embedded images as well, so it is with great pleasure that I have just deleted GarageBand 6 from my computers, and will from now on be using a great dedicated application called Podcast Chapters to add the chapter information each week before publishing just the one file that does everything we need.

Podcast Chapters

Podcast Chapters is a simple but incredibly useful application. It lives only to add Chapters to Podcasts, and it does a very good job of this. For a while now, I’ve been recording the Podcast each week in Adobe Audition, as this enables me to run some filters on the audio which help to improve the quality of the audio, but also enable me to remove some background noise that I was dealing with last year as some construction work went on nearby. I am also now able to leave the air conditioning on while recording, which helps me to avoid melting during the summer months here in Tokyo.

Podcast Chapters
Podcast Chapters

How Will Things Change?

I’m sure you are wondering how things are going to change, so let’s walk through this. As of a few days ago, I have removed the Enhanced suffix from the Podcast name, so now, in iTunes and other feed aggregators the podcast will be listed just as the Martin Bailey Photography Podcast. The feed for the Enhanced Podcast will remain the main feed, as that has the majority of our listeners subscribed to it.

I have gone back and converted a handful of episodes from 630 onwards to mp3s with chapters, and they are already being downloaded instead of the m4a Enhanced podcasts format. In any application that supports this type of feed information the new mp3 chapter format files will have a message saying that they have chapters and a link to a page with information on how to listen and view the images. This link will be a good indicator that you are listening to the new format.

Because I’ve been podcasting since before there were tools and web services to help manage a podcast feed, I actually developed my own admin console and database to manage my own feed, and I modified it last week to enable me to tag episodes with Chapters, so moving forward, this notification in the show notes that the episode has chapters will be automatically added to appropriate episodes, as you can see circled in red in this screenshot. Also notice how the link to the blog post is actually a link on some players, which is nice.

Overcast Screenshots
Overcast Screenshots

If you are already listening on an iOS device that is updated to iOS 12 you won’t really notice any difference, because the new format works exactly the same as the Enhance podcast did. The major benefits are really for people that were not able to see the embedded images because they didn’t use the Podcasts app or for Android users that didn’t manage to find a podcast player that supported the Enhanced podcast format.

If you have always subscribed to the audio only mp3 format feed that I also update each week, for the foreseeable future that feed will remain unchanged, but because I’m now only releasing one mp3 file each week, you will also see the chapter information and images if your podcasts player supports them, so you just gain the chapters without doing anything.

I might merge the two feeds at some point, but I can do most of that automatically without you having to do anything, so there isn’t really any point in going over that now.

Podcast Players that Support MP3 Chapters

What I do want to do is to take a look at some of the Podcast apps that I’m currently aware of that support MP3 Chapters. I’m actually going to be looking to you, especially Android users, to help me build the list out further. At this point though, I am aware of and have tested the following apps.

In the below image from left to right you’ll see the Pocket Casts app, Apple’s Podcasts app and my new favorite which is Overcast on the right. They all do a good job of displaying the images that I have embedded, but Apple’s Podcasts app doesn’t have any way to jump around between chapters, so it’s now without doubt the weakest offering of the three.

Podcast Players that Support MP3 Chapters
Podcast Players that Support MP3 Chapters

Pocket Casts is a really nice looking app, with a light and dark mode that you can freely switch between, and you have control over which chapter you listen to. Overcast is my favorite because it shows all of the information I want to see about the episode, including its title, the name of the Podcast feed, and the name of the current chapter below the photograph. Both Pocket Casts and Overcast have left and right swipe gestures that display the show notes, but Overcast has more information available with a view that even shows you all the chapters and how much of the current chapter you’ve listening to.

Overcast Chapters
Overcast Chapters

If I recall, Overcast is free with ads, but you can upgrade to Premium for around $8 a year. Unfortunately, Overcast is only available for iOS.  Pocket Casts was $4 I think, and it is available for both iOS and Android. I have been recommending an app called Downcast for viewing Enhanced podcasts, but unfortunately, at this point in time (Nov, 2018) Downcast doesn’t seem to support MP3 chapter images. It shows and can navigate between chapters, but the images are not displayed.

Desktop Players

I have yet to find any desktop applications that allow both playback of the audio and viewing the chapter images, but if you are at a computer, I would recommend just going to the post for each episode. There is an audio player embedded in every post, and the images can be viewed in context along with the manuscript and opened up to their largest available size in the Lightbox with a filmstrip, which is also a nice way to view the images.

Every episode has a short-link with the number of the episode, so for this episode for example, the short-link is https://mbp.ac/638. If you are subscribed to the podcast on a mobile device, you can just type that in to jump to the post, or head over to the Website and click on the Blog & Podcasts link in the top menu, and browse through the Podcast posts for any recent episodes that you’ve missed.

Of course, there is also a search button, the magnifying glass in the top right of all pages on the site, which should help you to find episodes on topics that you might be interested in. The search feature also has filters so that you can drill down to specific categories and even select the years that you want to see episodes from, all the way back to our humble beginnings in 2005.

Podcast Audio Archives Page

I guess to be thorough I should also mention the Podcasts Archives page which was the main way that I listed episodes on the site when I first got started, and before every episode got its own blog post. You can get to this page by clicking the Podcast Audio Archives link under the Blog & Podcasts menu. There is a link to download the podcast file for any of the episodes I’ve released to date, in case, for example, you want to download something for a trip during which you’ll be offline. Each section also has a link back to the post on the blog.

Audio Fliters
Audio Fliters

I needed a striking graphic for today’s post, so I took screenshots of all of the filters that I run on the audio, and dropped them into SmartSlider, the software that I use to create sliders for some of the pages on our website, and used some custom CSS to add some whacky perspective to each of the filter graphics. I added some parallax to each graphic as well, so that they wiggle around when you mouse over them, just for a bit of fun. Now that I have that though, I’ve placed it on the top of the Archives page, so check that out if you are interested.

Subscribing to Feeds

If you are new to the Podcast and don’t know where to subscribe, you can generally just search for Martin Bailey Photography in any podcast service like iTunes, and you should find the podcast. Unfortunately, I am not able to register the Podcast on Google Play, because Google has not made Podcasts available here in Japan yet. I keep checking in and will register when I can, but Google doesn’t seem to be in a hurry to open this up to us folks here in the Land of the Rising Sun.

Google Play Not in Japan
Google Play Not in Japan

Most services and players do allow you to subscribe to feeds manually though, and you can subscribe to this podcast direct with the following link.

https://martinbaileyphotography.com/podcast.php

We also have a page https://mbp.ac/subscribe with lots of different ways to subscribe to the feeds listed.

Blog Posts by Email

I guess another thing that is worth a mention, is that you can also subscribe to our newsletter and select the Blog Posts by Email option, which will actually send you an email each week when a new episode is released. This is particularly useful if you are not subscribed to the feed, as it is a good reminder to come along and check out what I’m talking about that week, and some people actually just read the email and don’t need to come to the Website. That’s not great for my statistics, but I’m really more interested in you getting your weekly fix than building my stats.

Get in Touch!

Finally, I’d like to invite you to get in touch if you know of any audio players or podcast players that support MP3 Chapters with images. I’d love to build out a more comprehensive list of these players, so that people have more choices, be it for iOS, Android, Mac or Windows, or Linux etc. It really doesn’t matter. If you know of anything, please let me know.

Also, if you have any problems as we switch to the MP3 with Chapters format, do let me know. One thing you will have noticed is that there will have been a few duplicate episodes in your feeds around now, because I rereleased around five episodes as MP3 after originally releasing Enhanced Podcasts. If you delete the Enhanced podcast, it shouldn’t come back again. If it does, you’re deleting the MP3, so delete the other copy instead. 

Thanks very much for listening today. As usual, now more than ever I’d like to invite you to share a link to this podcast with your friends. I’m hoping that this change will make the podcast more accessible to people that ruled it out because it was an Enhanced Podcast.


Show Notes

Overcast for iOS: https://overcast.fm

Pocket Casts for iOS and Android: https://www.pocketcasts.com

You can find the Podcast Chapters app here: https://chaptersapp.com

Our various subscription feeds page: https://mbp.ac/subscribe

And you can subscribe to our weekly Blog Posts by Email newsletter here: https://mbp.ac/news

Music by Martin Bailey


Audio

Subscribe in iTunes to get the podcasts delivered automatically to your computer.

Download this Podcast as an MP3 with Chapters.

Visit this page for help on how to view the images in MP3 files.


Ideal Exposure in the Winter Wonderland

Ideal Exposure in the Winter Wonderland

Here are the two images that I talk about in Chris Marquardt’s Tips From the Top Floor Podcast this week. I talked about techniques I use and teach on my Snow Monkeys & Hokkaido Photography Tour and Workshop, to control exposure and ensure you capture beautiful whites, and blacks full of texture, regardless of the brightness or color of the background. My technique also enables you to switch between both scenes instantly without messing around with Exposure Compensation. Take a listen to learn a few simple but effective tricks.

Here’s the Tips From the Top Floor episode in which I appeared.

http://www.tipsfromthetopfloor.com/2012/01/13/tfttf531-pma-and-snow-exposure/

 

Tanchou Study #7

Tanchou Study #7

Soft Arched Wings

Soft Arched Wings

If you’d like to join us to from Feb 13-24 2012, to photograph the Snow Monkeys, Red-Crowned Cranes, Steller’s Sea Eagles, White-Tailed Eagles, Ezo Deer and Northern Fox, as well as some breathtaking winter landscapes, we do still have a open spaces. See full details or book your place on our Photography Tours page, or contact us if you have any questions.

Snow Monkeys & Hokkaido Photography Tour & Workshop

 

Episode 289 : A Chat with Ibarionex Perello

Episode 289 : A Chat with Ibarionex Perello

Today, I’m proud and honored to be joined by fellow Podcaster and friend, not to mention just amazing photographer, Ibarionex Perello.

Ibarionex Perello

Ibarionex Perello

Ibarionex is a photographer, writer, educator and filmmaker with over 20 years of experience in the photographic industry. He’s been published in magazines such as Outdoor Photographer, Digital Photo Pro, Shutterbug, Popular Photography and Rangefinder.

Most of you though will already know Ibarionex as the host of the popular podcast, The Candid Frame Podcast, in which Ibarionex shares with us his conversations with some of the world’s best established and emerging photographers.

Ibarionex also recently released his first book Chasing the Light: Improving Your Photography with Available Light. I’ve read it, and it’s every bit if not more inspiring than the man himself, but today, I’m really pleased to be able to say, sit back and relax, and enjoy my conversation with Ibarionex Perello.

Here’s a link to the book on Amazon. Note that this is an affiliate link, so although the cost of the book to you is unchanged, you support this Podcast by buying with this link. Thank you!

Chasing the Light: Improving Your Photography with Available Light (Voices That Matter)

Here’s a link to Ibarionex’s video that we discussed as well. This is a beautiful and inspiring video, well worth a watch.

http://www.youtube.com/watch?v=mNuKRJiKa5M

Now, I also drop a bit of a bomb on you and Ibarionex in this Podcast. I won’t mention it here before you listen, but know that I’m going to be fine. I will not let this thing that’s cropped up beat me, and I’ll Podcast or blog about this more as I learn more myself.


Podcast show-notes:

The Candid Frame Podcast: http://thecandidframe.com/

Ibarionex’s book, “Chasing the Light” on Amazon: https://mbp.ac/ctl

Music from Music Alley: http://www.musicalley.com/


Audio

Subscribe in iTunes for Enhanced Podcasts delivered automatically to your computer.

Download this Podcast in MP3 format (Audio Only).

Download this Podcast in Enhanced Podcast M4A format. This requires Apple iTunes or Quicktime to view/listen.


Podcast 259 : Canon imagePROGRAF iPF6350 Printer Review

Podcast 259 : Canon imagePROGRAF iPF6350 Printer Review

My new Canon imagePROGRAF iPF6350 large format printer was delivered on August 13, 2010. The first thing to note with this printer is it’s big! Not huge as far as really large format printers, like the 44″ or 60″ models, but still, with the ability to print 24″ or 610mm wide sheet or roll paper, it’s a hefty bit of hardware. It weighs 51KG without and 66KG with the stand.

Canon ImagePROGRAF iPF6350

Canon ImagePROGRAF iPF6350

I’m not sure how it is in other countries, but in Japan, some distributors provide the stand as an option, and some include it, with an increased price of course. Take my advice, and get the stand. Trying to work with this printer on a table or workbench could be a pain, unless you have something about the same size as the Canon stand, on wheels, and that you can leave the printer on all the time. If you don’t have that, just get the stand. On the stand the dimensions of the printer are 39.1″ high, 46.4″ wide and 34.3″ deep. You also need space around the printer for airflow and to operate it.

The company I bought from here in Japan offered free delivery to drop the printer off in my car park. They wanted an extra $100 just to bring it up to my third floor studio, or I could pay $500 to bring the printer up to the third floor, unpack it, set it all up on the stand, and then install the drivers to my computer and check connectivity. They would also take away all of the packaging materials.

With me being pretty technical, I didn’t like the idea of paying someone to install drivers and stuff, so I didn’t take this service, and I wasn’t too impressed with the $100 just to carry it up two flights of stairs, so I refused, and just went with free delivery. The more I thought about this decision though, the more concerned I became. I had kind of thought that my wife and I could carry it up the stairs, but then I read in the Canon Manual that it requires three people to lift the printer onto the stand. I started to get really worried, and called the distributors to see if I could add the setup fees, and they said that if I did, they’d need another two weeks for delivery, so I gave up on that idea.

You’ll Need Help Setting it Up

On the day of the delivery, when I got out to the truck, I was pretty shocked to see the size of the box that the printer was in. I wished I’d been able to take a photograph of it, because it really was huge. It wasn’t even really a box. The printer was laid on a polystyrene frame on top of a huge wooden palette, and some double thickness super strength card board over the top and sides. My plan was to plead for help if my fears came true, and they’d come true.

I asked the guys that delivered the printer to help me carry it up to the third floor, and one of them helped me to do so. It was the middle of August, so as we carried the printer, my hands started sweating and the plastic was slipping in my hands. We had to turn the printer sideways to get it up the stairs, and only just managed to get it around the corner and through the door into the studio. I was so relieved when we put it down on the floor, but already knew it was going to be difficult to lift it again later with my wife, after I’d put the stand together.

I gave the delivery men $10 each for their trouble, and figured it was still cheaper than the $100 that the distributor had asked for, but I was still wishing I’d paid the $500 for the full treatment. After I’d set the stand up, I asked my wife to help, and she initially couldn’t lift it. After trying a few different ways, she was finally able to lift the printer up and straighten her legs. It was a tense minute or so until we got it in position and I was able to bolt the printer to the stand. Ultimately I was able to get the printer set up, but the moral of this story is, unless you have a couple of strapping mates to help you, pay for the white glove treatment, and have the printer installed by professionals. It’s really not worth the hassle if you don’t have the help.

You can connect to the printer with a USB cable or a network cable. With the printer having a Gigabit network adapter installed, I figured I’d use network, as opposed to USB, so that I could print from multiple computers more easily.

Dual Print Heads

After connecting the power and network cables, I followed the instructions to fit the two print heads that come with the printer, but not fitted. It’s not a difficult job, but there are parts that you aren’t allowed to touch, which is always a bit nerve-wracking for the uninitiated.

Dual Print Heads

Dual Print Heads

12 Color Lucia EX Pigment Inks

Then you have to insert the 12 Lucia EX ink cartridges. The printer comes with only 90ml of ink in the cartridges, despite them being 130ml cartridges. A little bit stingy on Canon’s part I thought, but then it does cost over $900 to buy a full set of inks, so I can kind of understand too.

Ink Cartridges

Ink Cartridges

Having given each cartridge a bit of a shake, and dropped them all in, you check that everything is alright with the little red light in front of each ink cartridge cover. The labels in front of each cartridge slot are color coded, and have the code for each cartridge, so there’s little room for error here.

12 Color Lucia EX Ink

12 Color Lucia EX Ink

As the printer takes about 20 minutes to initiate and draw the new ink through the pipes etc. the manual suggests quite considerately that you use this 20 minutes to install the printer drivers and software, which I did. In my network router settings I made sure that the printer would always be assigned the same IP address, so that the printer driver port, which is basically an IP port, would not lose contact with the printer if the IP address was changed in the future, due to the timing of other devices coming on to the network.

Automatic Print Head Adjustment/Calibration

After I confirmed that I could connect to the printer from my PC, I loaded the half roll of paper that Canon includes, and proceeded to tell the printer what sort of paper it was. I’ll go into this in more detail later, but basically, you have to specify the type of paper and the length of the roll when you insert the paper. The printer then continues to print a series of patches, and then from time to time pulls the paper back inside the printer, and scans the results. Then, using these results it calibrates itself, to ensure that the dual printer heads are aligned. This is basically the same as when you print out the pages of lines on consumer printers, and then have to tell the printer which number is most in line. The iPF6350 does this automatically, which I thought was pretty cool.

Head Alignment Calibration

Head Alignment Calibration

This might also be a good time to mention that the iPF6350 has a total of 30,720 nozzles, with 2,560 per ink at a pitch of 1,200dpi. Using the optical scanning mechanism that I just mentioned, the printer automatically detects non-firing nozzles, and compensate for that using other nozzles. I have never had problems with nozzle blockage with my Canon Pro9500 printer, but I can imagine it would be a real pain when printing a 24×36″ print, if you had lines on the print caused by a block nozzle, so this functionality is very welcome.

The printer comes with drivers for Windows, both 32bit and 64bit, and Mac OS too. It also comes with a whole load of application software. There are plugins for Digital Photo Professional, but as that software is the son of satin, I won’t be using that plugin, so we’ll just touch on the drivers and software that I’m using today.

iPF6350 Media Configuration Tool

Media Configuration Tool

Media Configuration Tool

Before you use a new paper, you have to configure it, either on the small LCD panel on the printer, or via the iPF6350 Media Configuration Tool. When you install the tool with the drivers, you add a batch of preset Genuine Papers based on your location. You are asked to make a selection. I believe this is based on what Canon has available in the various locations around the globe. You can also specify some generic papers and also cloths, and fabric, as well as synthetic paper and film, among other things.

You have to select Add Genuine Paper from the Media Configuration Tool, and tell the printer what it is, and input the size of the paper on the printer LCD as you load it. Once you’ve added a paper it will be available on the LCD for the future, and you can also select it from the printer drivers now too.

Custom Papers

Custom Papers

This batch of presets also includes 10 “Special” settings, which is what you have to select when adding some third party papers, such as the Hahnemühle papers that I use. When you add a new paper, the Media Configuration Tool sends a subset of data to the printer, and you then have to load the paper, be it sheet paper or roll paper. After you load the paper, you select the paper with the name that you specified, and then the printer asks the length of the paper. It gets the width automatically when you load it. After loading the paper, the printer will again print some sample patches, but this time it’s detecting the best settings to correctly feed the paper through the printer.

Paper Feed Adjustement Sample Patches

Paper Feed Adjustment Sample Patches

It’s probably a good time to mention too that if you want to use the Accounting Manager that I’ll talk about later, you’ll need to add the same paper multiple times if you use more than one width of paper, and you probably should for various sized sheet paper too. This will probably also lead to better paper advancement through the printer.

The printer uses a vacuum to suck the paper against the Platen, which is the plate below the paper. When you add new paper you can adjust the feed and vacuum strength, as well as a few other paper specific settings, but so far I’ve been fine with Auto for these settings. I did notice some black marking on the underside of some of the sheet paper that I did some initial test prints too, but that cleared up after I wiped what looked like a bit of oil off the paper guide rollers.

No Native 16bit Printing in Windows

The one thing that I find annoying when working with this printer is that despite it being able to print in 16bit mode, only the Photoshop plugin has this ability on Windows. The Windows OS does not natively support 16bit printing yet, so this means the only way that Lightroom will be able to print in 16bit mode, is if Windows supports it. Canon could probably develop a plugin for Lightroom, but if it’s like the one they have in Photoshop, you’d probably have to export the image to a standalone print module, and lose many of the benefits of the Lightroom Print Module, which is one of my favorite modules. I’ve done all of my printing from Lightroom until now, because it’s easy to use, and you can save everything as a preset. If a Canon plugin just made me export to a separate module and do all the same stuff that you have to do in Photoshop, there wouldn’t be much point.

The Mac OS though does natively support 16bit printing, so Lightroom on the Mac does have 16bit printing for this printer. I would just really like to see Windows include 16bit printing support, as I don’t want to have to crank up my Mac just for printing, and I have too much investment in Windows software to switch.

Although I’ve not tested to see if there really is any improvement when printing in 16bit compared to 8bit, what this means is that I am at the moment pretty much stuck with printing from Photoshop CS5, with the Canon plugin. This means that I don’t get the benefit of the Lightroom’s automatic resizing and output sharpening, so before I send my print job to the printer, I have been resizing to the size that I want to print the image at. You can use the Canon resizing and scaling in the printer, but I haven’t really gotten used to it, to the point that I can get the right border sizes etc. It’s pretty fiddly, and makes me miss Lightroom a lot.

Nik Software Sharpener Pro 3.0

I’ve also been using Nik Software’s Sharpener Pro 3.0 to sharpen the images specifically for the output size. It’s easy enough to use, but it means that even if I didn’t have to do any soft-proofing on my images, I pretty much have to create and save a PSD file for everything that I print. That’s not a bad thing I suppose, but it’s just not necessary when working with Lightroom alone.

Nik Sharpener Pro 3.0

Nik Sharpener Pro 3.0

Printing with the Photoshop Plugin

Once I’ve done my sharpening, or applied a boilerplate, I’m ready to send the image to the printer, which you do by selecting File > Export > iPF6350 Print Plugin… This invokes the printer plugin, and you can start to layout the image for your print. You need to select the paper that you already added via the Media Configuration Tool, and the resolution of the image, and whether to use 8bit or 16bit printing, which is linked in the plugin to the quality of the Gradations to be printed. I’ve created my own printer/paper profiles, so I select them under the Output Profile, but you can use the profiles from the paper manufacturer or Canon if you are using Canon paper.

iPF6350 Photoshop Plugin Main Screen

iPF6350 Photoshop Plugin Main Screen

I’ve got a little bit of hat eating to do here, in that I have said in the past that I always use the Perceptual rendering mode when printing, but when soft-proofing images for this printer, I’ve found that Relative Colorimetric often gives better results, so I’ve been using that more often recently.

Once you’ve completed the settings on the Main screen of the plugin, you’ll want to go to the Page Setup screen, and get your image laid out how you want it. You can see below that I’ve not used the Enlarging in the printer driver as I mentioned earlier, but I probably will give that a try as I get more used to the plugin. You specify the paper size here, as well as whether you want to print the image in the middle of the paper, or specify your own size for the top and left margins, giving you more control over where the image sits on the paper. That’s what I’ve done here, as I wanted that fine art spacing, with a larger border below the image than above. You’ll select your paper source here too, either Roll Paper or Sheet, and you also have to tell the plugin the width of the roll of paper that you will print to.

iPF6350 Photoshop Plugin Page Setup Screen

iPF6350 Photoshop Plugin Page Setup Screen

That’s pretty much it though, and then you just let it rip, and watch your print come out of the printer. I should note here that this printer is fast. I haven’t timed it, but even when printing to 24″ wide roll paper, the print seems to come out in no time. As a guess I’d say it’s about 3 minutes for a sheet of Super A1, at high quality. For reference, I’d say it’s even faster than my Pro9500 from Canon can print a sheet of Super A3, which is a quarter of the size.

Incredible Color Gamut!

Incredible Color Gamut!

Before we move on, I did just want to mention that so far, I’ve been incredibly impressed with the color gamut of this printer. It is able to reproduce far more colors and subtle tonal values than my Canon Pro9500. Even when I’m soft-proofing before printing, there is often just no need to change the image, and on images with very bright reds and greens, that often take a little more work in soft-proofing, they take much less time to get right than with my old printer. The new Lucia EX pigment ink system, plus the additional 2 colors that this printer has over the 9500, really seem to have improved the quality and accuracy of image reproduction.

2" Core Roll Paper Holder

2″ Core Roll Paper Holder

A few weeks ago I showed you How to Create a Gallery Wrap, and for that, I was using the Hahnemühle Daguerre Canvas, on a 17″ roll. As I said earlier, when you load a new roll of paper, you tell the printer the length. The full rolls of Hahnemühle paper that I’ve been buying are 39′ long. One problem is though, that when you print, using a few feet of paper, and then remove the roll, the next time you load the roll, you’re not likely to know exactly how much paper has been used already, and so you can’t tell the printer how much paper is left. If you are near the end of the roll, this could result in you running out of paper before the end of your print.

Automatic Roll Paper Recognition

To overcome this, you can select an option to have the printer print a bar code on the end of the roll when you eject the paper. Because the printer has that scanner built in, when you reload the paper at a later date, it reads the bar code, and can automatically tell what paper it is, and how much paper is left on the roll. This of course does waste about 5cm of paper each time you reload the paper, but I think it’s worth it to easily keep track of the paper I’m using.

Bar Code to Track Paper Type and Remaining Length

Bar Code to Track Paper Type and Remaining Length

Yesterday, I printed my first 24×36″ print which will be a gift for the colleagues that I’m leaving behind in my day-job that I just resigned from to pursue photography full time, and I used different paper to that which I had loaded, so I needed to switch them out. The iPF6350 takes both 2″ and 3″ core roll paper. The Daguerre Canvas comes on a 2″ core, which is the native size that the Roll Holder takes, as we can see above.

3" Core Roll Holder Adapter

3″ Core Roll Holder Adapter

The Hahnemuhle Museum Etching paper though, is a much stiffer paper, and I assume to help to prevent it from curling, it comes on a 3″ core. To fit roll paper with a 3″ core, you have to fit an adapter to the right side of the roll holder, like this, and use a different left side Roll Holder Stopper. These come with the printer as standard of course.

I should also note that when handling the rolls of paper, or any large sheet paper too, I always use white cotton gloves, to prevent the oils from my skin touching the paper, and discoloring it, either now, or in the future.

One of my best selling prints, and the one that my colleagues liked the most on my old office wall, was the one from the misty morning in Hokkaido, in 2008, with the Red-Crowned Cranes in the river, and the couple dancing in the distance. Although the printed image didn’t fill the paper, it was so cool to watch one of my favorite images comes out of the printer on 24″ wide paper.

Distant Dance Emerging from the Printer

Distant Dance Emerging from the Printer

Here is the finished print in a frame that I picked up yesterday. I shot just the picture, but it’s difficult to see the size of the print without a reference point, so I stuck my fat head as well, to give you some scale. I applied my signature with a water based pigment ink, fade proof pen from Sakura Color Product Corporation in Japan. I created a simple boilerplate in Illustrator for the middle, and added a simple message on the left, to my buddies from the day-job, in Photoshop before printing.

The Print, with My Fat Head for Scale

The Print, with My Fat Head for Scale

There are a few other bits of software that come with the printer that I wanted to mention before we finished.

Accounting Manager

First, the printer comes with an Accounting module, built into the drivers. If you register the cost of your ink cartridges and the paper that you use, you can use the Account Manager to calculate the exact cost of the prints you make. This is not only a lot of fun, but it’s essential if you are going to print for other people. I already have a few people that are asking if they can come round to do some large prints, which I don’t mind doing, but when it comes to asking for money for the prints, it’s really useful to be able to show them exactly how much each one cost.

iPF6350 Accounting Manager

iPF6350 Accounting Manager

Of course, this cost doesn’t include my time, or wear and tear on the printer, or the time spent learning to use it, or the skill involved in soft-proofing and laying the print out, etc. etc. So this would not be the amount that I charge a total stranger for a print. Also, it goes without saying that if I’m printing a fine art print of my own work, or prints for a client from a portrait shoot for example, I will be charging much more than this. As you can see though, the print that I did for my colleagues cost ¥1,790, which is about $20 at the current exchange rate. Not cheap by any means, so you don’t want to be making too many mistakes with these large prints. Test prints on smaller paper stock is certainly the order of the day.

Remote UI

As I say, the printer comes with a lot of software, but let’s look at one last thing that I’m finding useful, before we finish. If you enter the IP address of the printer into a Web browser, the printer dishes up a nice Remote UI admin console to any computer on your network. I can even check the ink levels on my printer from my iPhone if I needed to. You don’t need to install the drivers or anything to check that things are OK with the printer, or modify settings, check logs etc.

Remote UI via Web Browser

Remote UI via Web Browser

Although the printer has a very low level sleep mode, basically turning it off, but keeping an eye out for jobs coming in over the network, I’m not leaving mine on all the time at the moment. It just gets too hot in my studio when I’m not around. I’ll be in there much more often now that this is my full time job of course, and I’m looking forward to cooler days coming soon with the Autumn, so I might start to leave it on, but for the moment, I’m turning it off when not in use. And when I do that, I’m covering it with a large piece of plastic sheet from the hardware store. This is just to keep dust out, as dust in a printer can cause problems if it drops on the face of the paper as you are printing. Basically you print on the dust, not the paper, and then if the does falls away later you end up with a white spot, which I like to avoid.

iPF6350 with Plastic Cover (Home Made)

iPF6350 with Plastic Cover (Home Made)

One other thing that I didn’t mention is that the printer also requires a Maintenance Cartridge, which is used to dump waste ink during cleaning cycles. These are about $70 to replace, but I don’t know yet how long they last. I’ll find out as I start to print more in the coming months, and if it seems excessive, I’ll let you know.

Conclusion

I haven’t really done any comparison tests, and at $20 a chuck, I’m not about to start doing multiple copies of the same print with different settings, just to see if there are any minute differences in quality, but my initial impression of this printer is that it delivers incredibly high quality prints.

I’ve output large prints on Hahnemuhle Daguerre Canvas and Museum Etching now, and for smaller prints, I’ve also used Hahneumhle Photo Rag and Fine Art Baryta, all of which are showing excellent results. The printer reproduces a huge color gamut, amazing tonal range, easily achieved vivid and highly saturated colors, as well as breathtaking black and white prints.

At $3,995 on B&H and another $900 just to replace a full set of ink cartridges, this certainly isn’t a printer for the hobbyist. There are over a thousand pages in the multiple User Manuals, and it takes a fair bit of reading and studying just to figure out how to set up the paper and start printing. But if you have a need for large prints, and are somewhat technical and enjoy getting your hands dirty, like I do, then you’ll love this printer.

Just make sure you have enough space to put it, and a few friends to help you get it set up, or buy the white glove delivery service when you buy the printer, and you won’t regret a thing.


Podcast show-notes:

Details of iPF6350: http://bit.ly/MBPiPF6350

Buy from B&H: http://bit.ly/BHiPF6350

Music from Music Alley: http://www.musicalley.com/


Audio

Download the Enhanced Podcast M4A files directly.


Podcast 257 : Making a Gallery Wrap

Podcast 257 : Making a Gallery Wrap

Here’s a video for this week’s Podcast in which I show you how to make a gallery wrap with the Hahnemühle Pro Gallerie Wrap System.

NOTE: You can now view the embedded video on your iPad, thanks to a recent Vimeo update!

By the way, I didn’t include this in the video to keep it short, but after I created the wrap, to hang it, I added the following brackets and twine so that I could hang the wraps on regular hooks. These can be found at good craft stores and framing supply shops.

Back of Gallery Wrap

Back of Gallery Wrap

And here is my first wrap, hanging to the right of my workspace.

My First Gallery Wrap

My First Gallery Wrap

And here’s the second wrap, that I created during the video, hanging at the top of the stairs, outside my studio door.

My Second Gallery Wrap

My Second Gallery Wrap

(Excuse the weird light, it was almost dark when I shot this, without any lighting or flash. 🙂 )

Top of the Stairs

Top of the Stairs

Items Used

You can buy the Hahnemühle Pro Gallerie Wrap System from B&H following the following links.

Hahnemuhle PRO Gallerie Wrap Positioning Corners

I used Hahnemuhle Daguerre Canvas (400gsm) – 17″ Wide x 39′ roll canvas for my wraps this time.

For this wrap I used 13″ Stretcher Bars and 19″ Stretcher Bars, but there is a whole range of sizes available so you can mix and match to create a variety of frame sizes. I’m looking forward to doing a 20×32″ gallery wrap, when the 24″ Daguerre Canvas comes back into stock.

I also want to use the Hahnemuhle Protective Spray, but I can’t find anywhere that sells this in Japan and it can’t be shipped abroad from B&H, so I’m stuck for now. If anyone knows where I can get this in Japan, I’d really appreciate it if you’d drop me a line to let me know.

So, that’s it! I hope this has been of some use.

NOTE: There is an iPhone/iPod format version of the embedded video in the Podcast stream, that is available in iTunes.