Display and Monitor Calibration with the X-Rite ColorMunki Photo (Podcast 249)

Today I take you through a full monitor and printer calibration with the X-Rite ColorMunki Photo, and we also take a look at how to optimize a printer profile. Although it was a little late, I finally published an iPod optimized version of the video via the iTunes/RRS stream, so...

Thank you for visiting!

Martin Bailey has been releasing weekly podcasts and blog posts since 2005! Almost all of the 760+ posts here contain a full text article with photographs and illustations, and take at least one day, sometimes three to four days to produce.

You are welcome to listen to the Podcast with the audio player and follow along with the images discussed below.

If you value what we do, please consider a Patreon contribution of $3 or more to unlock the full text of more than 760 posts and gain access to the exclusive MBP Community. There are also higher tiers with various benefits, some including one-to-one Mentorship.

Please visit our Patreon site for full details, and take your photography to a whole new level! Become a Patron!
Existing Patrons please login to access posts and benefits. Thanks for being awesome!

Image Gallery

If no images are displayed here, please refresh your browser.

To view this content, you must be a member of Martin's Patreon at $3 or more
Unlock with Patreon
Martin Bailey
Martin Bailey is a nature and wildlife photographer and educator based in Tokyo. He's a pioneering Podcaster and blogger, and an X-Rite Coloratti member.
10 Comments
  • Karo Kendimian
    Posted at 18:13h, 03 July Reply

    Thank you a lot, Martin. Walking through the process and discussing the problems were helpful, indeed.

  • Marcus
    Posted at 20:16h, 04 July Reply

    Thorough and clear walk through !! Especially the discussion of your printing struggle with the lush green waterfall shot – I feel your pain ;P

  • Karo Kendimian
    Posted at 05:11h, 05 July Reply

    Hi again

    About the lush green waterfall photo for which the printer profile was causing trouble…
    Cropping the area with the problematic greens and trying to optimize the profile for that area alone may be helpful…

    Another option:
    Read the RGB values of that area and mask-edit the area slightly until it returns to the gamut.

    What do you think?

  • Martin Bailey
    Posted at 11:06h, 05 July Reply

    That’s good to hear. Thanks for leaving the comment Karo!

    Martin.

  • Martin Bailey
    Posted at 15:03h, 05 July Reply

    Woops, for some reason the last two comments weren’t there when I wrote my last post.

    Thanks Marcus. It sure can be a problem.

    Karo,

    I might be wrong, but I don’t think cropping the image would work. As you might have seen in the video, there were a number of cells on the optimization print out that were not used, which makes me think that it has all the samples it needs.

    I’ve spend a lot of time in the past changing areas of prints to bring them back into gamut, and I personally have never been successful. The area I change always ends up looking like a septic scab or something. I do find it much easier to print these sort of greens on some gloss or satin papers though, which would be my choice of action when trying to overcoming this sort of problem.

    Cheers,
    Martin.

  • Karo Kendimian
    Posted at 07:14h, 06 July Reply

    Frankly, I hadn’t noticed the blank cells. That surely would answers my question ๐Ÿ™‚

    However, I’m not sure if the printer can be blamed for not delivering those subtle greens on that paper… I would rather formulate it as ink/paper incompatibility.

    Anyway, it’s still a shame to confront such issues after being this fastidious and striving for quality, especially during the final coronation act of holding the print…

    Great photos, BTW!

  • Martin Bailey
    Posted at 11:10h, 06 July Reply

    Yes, well that is part of my point. The printer is capable of recreating these colors, but not on that paper. As I said, if I change the paper, I can create a print with these greens that I’m happy with.

    This is the reason I changed to Harman GLOSS paper for the Colors of Japan Folio here:
    http://mbpfolios.com/The_Colours_of_Japan_Folio.html

    Conversely, the top wild flower photo in my Flowerscapes folio, which also has lots of greens, could not be printed on the Harman GLOSS. I used the Hahnemuhle Photo Rag for the Flowerscapes folio to get a good representation of this photo. Also, the reds in some other photos were not so nice on the GLOSS paper.
    http://mbpfolios.com/Flowerscapes_Folio.html

    It really comes down to the idea that every photo has its perfect paper. In producing my folios the most challenging aspect is matching a full set of 10 or 12 images to one paper type. In addition to changing paper, I even had to drop some photos in favor of others, just because I couldn’t get them to work on a particular paper. This happened on one set after I’d successfully soft-proofed and printed the majority of the other images. That hurt! ๐Ÿ™‚

    And thanks for the kind words about the photos! ๐Ÿ™‚

    Cheers,
    Martin.

Post A Reply to Martin Bailey Cancel Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.