Peak Design Slide Camera Sling Straps (Podcast 629)

by | Aug 14, 2018 | Gear, Podcast, Review | 6 comments

I recently bought two Slide straps from Peak Design and thought I’d provide a quick review of these straps today having now used them extensively for the last couple of months.

More and more of my workshop participants have been turning up using the Peak Design Slide camera strap system, so I’d had my eyes on this for a while, and then met a listener earlier this year at Canon’s headquarters, to see my exhibition there, and he had one of these straps on his camera, so I took a good look at it. I was impressed with the flexibility of use and the quality of the product, so I decided to change my camera straps for the first time in around eight years.

What’s Included?

In the Slide package, you get the strap, obviously, and a total of four Anchor Links, and a small Anchor Mount, that you can attach to a tripod mount screw on the bottom of the camera, and there’s a hex key to help with that.  There is also a nice pouch to put the strap in, which I thought was unnecessary at first, but because there are metal parts on the strap, I actually used these to store the straps in my bag, to stop the metal from rubbing against my camera and lenses, so I decided this was a nice addition. 

Peak Design Slide Strap Contents
Peak Design Slide Strap Contents

I didn’t include it in this photo, but when you remove that piece of white card with Find Your Peak written on it from the packaging, there is more helpful information on the various configurations of the strap etc. so I felt that the packaging is very well thought out. By the way, this is my black strap, but I bought a grey on at the same time, as you can see in this next image (below). I sometimes use two straps at the same time, and I figured it would be nice to have a choice of color.

Peak Design Slide Straps in Grey and Black
Peak Design Slide Straps in Grey and Black

As we proceed, I’m going to talk about the points that have made this my new strap of choice in the order of importance to me. This might not be the same order that you’d chose, but bear with me, as we will cover everything that I believe is important to talk about.

Anchor Link System

The most impressive thing about this system is the Anchor Links. These work incredibly well, enabling us to quickly attach or remove the camera strap by simply pushing down on the button shaped disk on the Anchor, and then slide it out of the connector housing. Of course, attaching a strap is even easier; you just have to drop the disk into the housing and pull on the strap until it snaps into place.

I’m a firm believer in using gear that works with us, not against us. Everything I use in my photography helps me to work smoothly, rather than get in the way. I take my camera straps off a lot while shooting. For example, if I’m working on a tripod with a bit of a breeze, with the strap attached to the camera it can move around in the wind and introduce camera shake, especially if it starts to bang against the tripod legs. Because of this I generally remove the strap when using a tripod, but then I put it back on again as I move to another location, so literally, for me, a camera strap might be attached and detached some twenty or thirty times a day, so it needs to be a quick and easy operation.

As you can see from this next image (below) I have attached an Anchor to both the top left and right side strap loops on my camera, as well as to the loop on the bottom right side of my battery grip. Attaching one end of the strap to the battery grip like this allows the camera to swing down at a such an angle that my hand goes straight to the right side grip, with my finger falling naturally on the shutter button as I raise the camera to my eye.

Peak Design Slide Strap
Peak Design Slide Strap

Silicone Grip

If I attach the strap to the top left and right loops, I can of course simply use the Slide as a regular camera strap. To make this strap work as a sling and to stop it from sliding around when in use as a regular camera strap, the Peak Design team have ingeniously added two strips of silicon on just one side of the strap, so you use the smooth side when you are using the strap as a sling, and when you want it to stay put, just flip the strap over so that the silicone grip is in contact with your clothing. This works really well!

Anchor Mount

I don’t always use my camera with the battery grip, sometimes preferring to just take it off and shoot with a lower profile camera, so the addition of the Anchor Mount is really useful too. As you can see in this photo (below) it screws into the tripod mount on the bottom of the camera, giving you an optional position to attach the strap if you want to use it in a sling configuration, but you don’t have the battery grip with the third loop. Of course, when I’m working like this, I am not using a tripod, so the Mount generally stays on like this until I put my battery grip with the Really Right Stuff L-Bracket back on to the camera.

Peak Design Slide Strap with Anchor Mount
Peak Design Slide Strap with Anchor Mount

Replacing my Old Sling System

In addition to my old camera straps, I sometimes used a camera sling system for my long lenses, but that requires that I take along both straps when I travel, and I find it a bit annoying to have to attach the special ring that they provide to the lens foot, especially as I have to then detach it again to use the lens on a tripod. That slows me down, and I always like to find ways to maintain my flow rather than interrupting it. With the Peak Design Slide strap, I was able to simply attach one of the Anchor Loops to the front of my lens foot from Really Right Stuff, and attach one end of that strap to that, while leaving the other end attached to the camera body. The camera then hung down by my side as a sling strap, and I could easily swing it up to eye-level to shoot whenever necessary. 

Peak Design Slide Strap with 100-400mm
Peak Design Slide Strap with 100-400mm

Another thing that I like about this method of using the Slide strap as a sling, is that I have the strap connected to both the lens and the camera. My old sling only attached to one ring, usually on the lens, and that allows the camera to rotate and come away from the lens in certain situations. To prevent the camera from dropping to the floor I used to feed the shorter straps left after taking my main strap off the camera back through the sling strap. With the Slide though, because the camera and lens are both being supported, it’s much less likely that the lens would work loose, so I don’t feel as though I need a safety leash now, and that is once again less weight to travel with.

Talking about weight, if you are wondering out much weight this system can carry, apparently, the Anchor Link System is rated up to 200 pounds or 90 kilograms. On the packaging, it says that if the red core starts to show through on the line anchor thread, it’s time to change them. For their thickness, it’s surprising, but so far I have felt very safe and had no issues with my large DSLR and battery grip, as well as when using with my 100-400mm, which is a relatively hefty setup. 

[UPDATE: It seems that due to a very small number of failures in the in v3 Anchors Peak Design are now replacing these with v4 Anchors. Check this page for details. Well done Peak Design for identifying and attending to this issue! And thanks to Barry Schleicher for pointing this out to me.]

Quick Adjusters Both Good and Bad

The last thing that I want to talk about, has both good and bad aspects. To easily adjust the length there is a Quick Adjuster on either end of the strap. You pull the metal clasp out and can then easily shorten or lengthen the strap. As long as there is some tension or downward pull on the strap, these adjusters are rock solid and work great.

However, if for example, you have the camera on your lap, as mine often was as we traveled around Namibia in June, if you even slightly nudge the adjusters, they slide down very easily, even when the clasp is in the locked position. This meant that a number of times I found the camera hanging down much lower than I had originally set it, and I’d found that the Quick Adjusters had worked their way almost to the full extent of the strap. Of course, because they are Quick Adjusters, it only takes a second to shorten them again, but I can’t help thinking that once they are locked, they should do a better job of maintaining the user’s chosen length for the strap. That is the only gripe, and it’s a very small gripe rather than a problem.

Conclusion

All-in-all I’ve been very happy with my decision to switch to the Peak Design Slide strap and can fully recommend them if you are looking for a new or better way to carry your camera. I love it when a piece of gear helps me to overcome issues or makes my shooting workflow smoother, and these straps definitely do that. This review has not been sponsored in any way. I’m just sharing information on a product that works for me, in the hope that it might help you with your photography too. You can find the Slide strap and all of their other great products over on the Peak Design website at peakdesign.com, and if you want to help support the Podcast and blog, you can also use our B&H affiliate link which is mbp.ac/pdslide.


Show Notes

Support the Podcast by using our B&H affiliate link: https://mbp.ac/pdslide

Find Peak Design here: https://www.peakdesign.com

The Slide Strap is here: https://www.peakdesign.com/product/straps/slide

Music by Martin Bailey


Audio

Subscribe in iTunes for Enhanced Podcasts delivered automatically to your computer.

Download this Podcast in MP3 format (Audio Only).

Download this Podcast in Enhanced Podcast M4A format. This requires Apple iTunes or Quicktime to view/listen.


Get this post's short-link:

If you find this post useful, please consider supporting Martin Bailey Photography on Patreon!

There are multiple tiers with various benefits to help you become a better photographer.

Martin Bailey is proud to partner with the Journal of Wildlife Photography!

Subscribe and get Mastering Light: The Essence of Wildlife Photography eBook FREE! ($97 Value)

Gain access to 5 Years of back issues with a value of $485!

In addition to the amazing content already available, Martin will be writing for the Journal of Wildlife Photography in the coming months. Stay tuned!

6 Comments

  1. Barry Schleicher

    It appears that the anchors in your pictures are version 3 anchors. Peak Design is replacing version 3 anchors with version 4 free of charge. Version 3 anchors have been found to fail in a small number of cases. Version 4 anchors have a thicker cord. Hats off to Peak Design for recognizing a problem and providing an easy solution. I replaced all of my version 3 anchors and backups and the process was efficient and smooth. Peak Design appears to be a class act. For more information on the Peak Design replacement program see their website.

    As always Martin thanks so much for all you do for the photography community.

    By the way I thought the Morocco video was wonderful.

    Reply
  2. Mundo Manzú

    Hi Martin,

    As alway, great review!

    In the first image where you have the gray strap attached to the bottom right side of the battery grip, is that a strong attachment point. I thought of doing the same thing, but for some reason wasn’t too confident the pin would hold.

    Mundo

    Reply
    • Martin Bailey

      Hi Mundo,

      That strap loop is made by Canon for exactly that purpose, so I think we can trust it. Besides, I’ve been doing this for a while now without any issues.

      A thumbs-up from me! 🙂

      Thanks for stopping by.

      Martin.

      Reply
  3. J D Ramsey

    Martin – Thanks for this review. I had an earlier version of the strap, but I found the constant movement of the quick adjuster, as you described, to be such an annoyance that I finally gave up on the strap. I know you found it only a minor flaw, but PD has been aware of this for a while (in conversations with their folks at Photo Expo in NYC they knew this was an issue, but they’ve done nothing to fix it). I admit that I don’t like any camera straps. I mostly use a Spider hand strap. PD makes some of the better camera straps, but for me the constant movement of the quick adjuster so that the camera ends up hanging far too low was a major problem.

    Reply
    • Martin Bailey

      Hi Dave,

      Thanks for the comment and information. It will be interesting to see how I feel about the strap shifting over a longer period of time. Right now it doesn’t bother me much, but I value your opinion on this and have heard from a few other people that gave up on these straps because of the same issue, so I know it’s a problem.

      I don’t think I’ll give up on the straps quickly, but I’ll update this post should I find it more annoying that I do now.

      Regards,
      Martin.

      Reply

Leave a Reply to J D Ramsey Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.